Christmas Lights, Chimney Repairs and a 6am Start to Beat the Traffic – Roof Tops and Pit Stops

Dan the Cherry Picker Man and Tomek giving thumbs up after completing chimney repairs in Stoke-on-Trent.

Roof Tops and Pit Stops | 8–14 November 2026

Another week in the life of Dan the Cherry Picker Man

You know those weeks when you look back and wonder how on earth you managed to fit everything in?

Well, this has been another one of those.

We started the week putting up Christmas lights with a cherry picker, squeezed in a Remembrance Sunday parade, filmed a truck-mounted cherry picker at Trent College and welcomed a new member of the family.

And that was just Sunday!

The rest of the week involved chimney repairs in Sheffield, roof verge repairs in Leicestershire, a particularly heavy concrete chimney top in Ollerton, an excellent day’s teamwork with Tomek near Stoke-on-Trent and a six o’clock Saturday morning start in Nottingham to beat the parked cars.

Somewhere in between, I even managed a workout, a trip to the tip and another episode of On The Boom – The Access Industry Podcast.

So, grab yourself a brew, and here’s what I’ve been up to this week.


Sunday 8 November – Christmas Lights, Remembrance Sunday and a New Addition to the Family

Sunday morning started at about half past seven.

Not exactly a lie-in, but I had a good reason for getting up early.

We still had the HighDrive HX200 truck-mounted cherry picker, which Hannah and I had been using to create promotional content for Heights for Hire’s self-hire service.

I’d spent the previous couple of days filming the machine carrying out all sorts of jobs, and I wanted to make the most of the opportunity before we had to hand it back.

So I headed next door to the shipping container where we keep our Christmas decorations and started digging out the lights.

Yes, Christmas lights.

In November.

I know!

Putting up Christmas lights with a cherry picker

The idea was simple.

One of the things I wanted to demonstrate in our promotional videos was how useful a self-hire cherry picker can be for putting up Christmas decorations.

Whether it’s a business decorating its premises or somebody with a particularly large house, installing lights at height can be an awkward job.

So why not use the HX200 to put up our own?

I got started at around 7:30am, working my way around the house and getting as many lights into position as possible.

Unfortunately, I had a deadline.

I needed to finish by about 9:45am, because at 10:15 I had to be at the Scout hut.

It was Remembrance Sunday.

So I got as much done as I could, packed everything away and got myself ready.

Remembrance Sunday – A family affair

Scouting is very much a family activity in our household.

Hannah is a Squirrels leader, I’m a Cubs leader, and Robyn is a Cub herself.

So the three of us were taking part in the Remembrance Sunday parade.

Thankfully, a family friend was looking after Wren while we attended.

It’s always a privilege to take part in Remembrance Sunday, and I think it’s particularly important that the younger generations understand why we come together to remember those who have served and sacrificed so much.

Once the parade had finished, however, there wasn’t much time to hang around.

We still had a cherry picker to return.

But first, I wanted to squeeze in one final filming opportunity.

Trent College – A beautiful backdrop for the HighDrive HX200

We headed over to Trent College in Long Eaton, Derbyshire.

I’ve carried out quite a bit of work at Trent College recently, and it’s a fantastic building.

With its impressive architecture and beautiful clock tower, I thought it would make an excellent backdrop for some final promotional footage of the HX200.

And while we were there, I also had a little bit of work I wanted to do.

The clock tower has bird spikes installed around parts of the structure, and I wanted to check their condition.

One of the advantages of having the HighDrive machine was that it allowed me to reach areas I can’t normally access with my own cherry picker.

So I took the opportunity to get up there and have a proper look.

We also captured some footage of the machine alongside the college buildings.

A lovely setting for a cherry picker demonstration.

Goodbye to the HX200

With the filming completed, we headed back to B&Q in Sutton-in-Ashfield, where we’d collected the machine.

And that brought our few days with the HX200 to an end.

We’d managed to film it carrying out a wide variety of jobs, from roof and gutter maintenance to aerial removal, pest control access, tree work and Christmas light installation.

It’s been a busy few days, but I’ve thoroughly enjoyed using the machine and working with Hannah to create the content.

Now comes the small matter of editing it all!

Robyn finally gets her birthday present

Once we’d returned the machine, we headed home.

I took Wren inside while Hannah and Robyn dashed off on a rather exciting mission.

They were going to collect Robyn’s birthday present.

Now, Robyn’s birthday was back in August, but we’d promised her something a little unusual.

A crested gecko!

There was a particular gecko she’d set her heart on, but it wasn’t available straight away.

So she’s had to wait patiently for it.

And finally, it had arrived!

So Hannah and Robyn went to collect our newest family member.

After waiting since August, I’m sure Robyn was delighted.

And just like that, we’ve got another little creature joining the household.

Between the children, work, Cubs, cherry pickers and now a crested gecko, life certainly isn’t getting any quieter!

Not a bad Sunday, all things considered.


Monday 9 November – A Tricky Chimney Rebuild in Sheffield

Monday took me up to Sheffield, South Yorkshire, where I’d arranged to assist a gas engineer with the installation of a new chimney liner.

On paper, it was a fairly straightforward job.

Get the cherry picker into position, prepare the chimney, help the engineer install the liner, rebuild the top of the stack and make everything good again.

Of course, as anyone who works on chimneys will tell you, things aren’t always quite that simple.

Tight parking and awkward access

The first challenge was getting the cherry picker into position.

Parking was extremely limited, and access to the property was difficult.

Not exactly ideal when you’re trying to manoeuvre a machine into the right position to reach a chimney.

Thankfully, after a bit of careful manoeuvring, I managed to get in, set up and ready to work.

But before we could think about installing the liner, there was some fairly substantial preparation to do.

Half a chimney, and a neighbour who didn’t want theirs touching!

The chimney stack was shared with the neighbouring property.

And the neighbour had made it very clear that they didn’t want anything disturbing their side.

Fair enough.

The difficulty was that the existing concrete flaunching covered the top of the stack, and I needed to remove the section on our side to allow the new liner to be installed.

So, using a large grinder, I carefully cut through the flaunching to separate the two halves.

Once I’d established a clean division, I could remove the concrete from our side without unnecessarily disturbing the neighbour’s.

I also needed to take down the top two courses of brickwork.

It was quite a bit of work before we’d even started with the chimney liner itself!

Making the most of the waiting time

While I was waiting for the gas engineer to be ready, I decided to make good use of the time.

With the top courses removed, I got on with grinding out the remaining mortar joints in preparation for repointing.

It’s an important part of any proper chimney repointing job.

You can’t simply smear new mortar over old, deteriorating joints and expect it to last.

The old mortar needs removing to a suitable depth so that the fresh pointing can form a proper bond with the brickwork.

By the time I’d finished preparing the chimney, the gas engineer was ready for us to install the liner.

Perfect timing.

Dropping the liner and rebuilding the chimney

Thankfully, the chimney liner went down successfully.

After all the preparation, it was nice to have that part of the job go smoothly.

With the liner installed, I could start putting the chimney back together.

That involved rebuilding the top two courses of brickwork, repointing the prepared joints and applying new concrete flaunching to the top of the stack.

All while making sure the neighbouring half of the chimney remained undisturbed.

While I’m here, I might as well do the other chimney!

There was also a second chimney at the rear of the property that needed attention.

So while I had the cherry picker on site, I took the opportunity to carry out some maintenance on that one too.

I removed and replaced the deteriorated flaunching and tidied up the pointing, making sure the brickwork was in good condition.

That’s one of the advantages of having the right access equipment available.

Once you’re up there, it makes sense to deal with any other agreed maintenance rather than having to arrange another visit later.

A dash back to Nottingham

With both chimneys completed, it was time to pack up and head back towards Nottinghamshire.

But I had one more stop to make.

I needed to call in at JayPLAS in Basford, Nottingham, to collect some roof putty for a job I’d got booked in Leicestershire the following day.

Fortunately, I’d finished the Sheffield job early enough to make it there.

Materials collected, tomorrow’s job prepared for, and finally it was time to head home.

A successful Monday.


Tuesday 10 November – Flexim Roof Putty, Unwanted Birds and Stop-Motion Animation at Cubs

Tuesday took me over to Belton in Leicestershire, where I’d arranged to spend the day carrying out roof maintenance on a residential property.

The customer had several problems that needed sorting, including deteriorating mortar along the roof verges, birds finding their way into the building and ivy growing up the side of the house.

Plenty to keep me occupied!

Three large verge ends to repoint

The main job was repairing the mortar along three large roof verge ends.

For anyone unfamiliar with roofing terminology, the verge is the edge of a pitched roof where the tiles meet the gable end of the building.

Traditionally, these edges are finished with mortar to help secure the tiles and provide a neat, weather-resistant finish.

Unfortunately, the existing mortar had started deteriorating, with sections becoming loose and falling out.

Rather than using conventional mortar, the customer had asked me to repoint the verges using Flexim roof putty.

Flexim is a flexible roofing compound designed for applications such as bedding and pointing roof tiles.

It’s particularly useful in situations where you want a material that can accommodate a little movement without cracking in the same way as rigid cement mortar.

And with three substantial verge ends to repair, I certainly had plenty of it to apply!

It was a time-consuming job, but I worked my way along each verge, removing the loose material and making good the deteriorated sections.

Birds finding their way into the house

While I was there, the customer also wanted me to address another problem.

Birds had been getting into the property through decorative openings in the brickwork.

These openings might look attractive as part of the building’s original design, but unfortunately, they also provided a convenient entrance for the local wildlife.

So I installed mesh across the affected openings to prevent birds from getting inside.

Hopefully, that’ll put an end to the unwanted visitors!

Removing ivy from the building

The final job was removing ivy growing up the side of the house.

Ivy can look quite attractive on an older property, but it can also become a maintenance problem, particularly when it starts growing into mortar joints, around roof tiles or behind other building details.

Using the cherry picker, I was able to reach the higher sections and remove the vegetation.

Between the three large verge repairs, the bird-proofing and the ivy removal, it turned into a full day’s work.

But I got everything finished in the end.

Harness off, necker on!

After finishing in Belton, it was back home to get changed.

Because Tuesday evening means one thing.

Cubs!

And this week, we were finally putting last week’s preparations into action.

The previous Tuesday, we’d been building sets and creating storyboards for our stop-motion animation project.

This week, it was time to bring those ideas to life.

The Cubs used their sets and characters to create their own stop-motion animations, taking photographs and moving things a little at a time to create the illusion of movement.

It’s a brilliant activity for encouraging creativity, patience and teamwork.

And I’m pleased to say it all went very successfully.

It’s always rewarding when an activity you’ve spent time preparing comes together and the youngsters enjoy themselves.

Another busy Tuesday completed.


Wednesday 11 November – A Chimney Without Any Flaunching and Christmas Lights!

Wednesday started with a chimney repair in Burton Joyce, Nottinghamshire, followed by what should have been a straightforward gutter clearance in Nottingham.

Unfortunately, things didn’t quite go according to plan.

But as it turned out, that gave me the perfect opportunity to get on with something I’d been wanting to finish for a few days.

The Christmas lights!

Burton Joyce – A chimney with no flaunching!

My first job of the day was in Burton Joyce, at a property next door to my cousin’s house.

My cousin had recently been having some work carried out on his own property, and while the contractors were there, they’d noticed something rather concerning about the neighbour’s chimney.

It was completely missing its flaunching!

For anyone unfamiliar with chimney terminology, flaunching is the mortar or concrete that forms the weatherproofed top of a chimney stack, surrounding the chimney pots and helping to shed rainwater away from the flues and brickwork.

Without it, the top of the chimney is much more exposed to the weather, and there’s an increased risk of rainwater finding its way into the stack.

Fortunately, the problem had been spotted, and my cousin had recommended me to his neighbour.

So I headed over with the cherry picker to carry out the necessary repairs.

The job was to install new flaunching and restore the protective finish to the top of the chimney.

It’s always nice getting work through recommendations, particularly when it comes from family.

And with that job completed, it was time to head into Nottingham for the next one.

Roden Street – Defeated by parked cars!

My next job was supposed to be a gutter clearance on Roden Street in Nottingham.

Now, one of the biggest challenges with operating cherry pickers isn’t necessarily reaching the work.

Sometimes it’s simply finding somewhere to put the machine!

And unfortunately, that was exactly the problem here.

When I arrived, there were cars parked along the side of the road, leaving me without the access I needed to position the cherry picker properly.

I had a look at the situation, but there simply wasn’t a practical way of getting the machine into the required position.

There’s no point trying to force a machine into somewhere it won’t safely fit.

So, rather frustratingly, I had to abandon the job for the time being.

One of those occasions where the work itself might be straightforward, but the access makes it impossible.

Still, these things happen.

And rather than waste the rest of the day, I decided to put the time to good use.

Back home – Christmas lights, round two!

With the Nottingham job unable to go ahead, I headed back to base.

And I knew exactly what I was going to do.

Carry on putting up the Christmas lights!

I’d started the job on Sunday morning while we still had the HiDrive HX200 cherry picker.

Unfortunately, I’d only managed a couple of hours before having to get changed and head off to the Remembrance Sunday parade.

So there was still quite a bit left to do.

Wednesday’s unexpected change of plans gave me a good chunk of time to carry on.

I spent much of the remaining day working my way around the house, getting the lights positioned and everything looking how I wanted it.

And I’m pleased to say I’ve now managed to get the majority of the work completed.

Roll on 1 December!

I must admit, it’s looking pretty fantastic.

I know some people think November is far too early to start putting Christmas decorations up.

But when you’re trying to fit something like this around work, family life and everything else, sometimes you’ve just got to take the opportunity when it presents itself.

Besides, I’m not planning on switching them on just yet.

The big switch-on is going to be 1 December.

And I’m really looking forward to seeing how it all looks when they’re finally illuminated.

Hopefully, Robyn and Wren will enjoy the finished result as much as I will.

Not quite the Wednesday I’d planned, but a productive one nonetheless.


Thursday 12 November – A Heavy Concrete Chimney Top, a Trip to the Tip and Podcast Night!

Thursday was one of those rather satisfying days when everything seemed to go according to plan.

I had a chimney repair booked in Ollerton, Nottinghamshire, and for once, the job turned out to be relatively straightforward.

Which meant I managed to squeeze in a workout, a much-needed clear-out of the yard, a trip to the builders’ merchants and an evening recording another episode of On The Boom – The Access Industry Podcast.

Not a bad day’s work!

Ollerton – A chimney top that’s falling apart

My first job was at a property where the customer had become extremely concerned about the condition of their chimney.

The chimney had a rather unusual top.

Instead of conventional flaunching formed around the chimney pots, it had a large, solid, precast concrete section.

Unfortunately, the back corner of this concrete top had broken away and fallen off.

And understandably, the customer was worried about the condition of the remaining concrete.

After all, you don’t particularly want large pieces of concrete falling from the top of your chimney!

Sometimes it’s easier to remove the whole thing

Once I’d got up there and inspected it properly, I decided the best approach was to remove the entire concrete top.

And that’s exactly what I did.

I quite literally lifted the whole thing off the chimney.

Now, this wasn’t a lightweight piece of concrete.

It was pretty heavy!

But thankfully, I managed to remove it.

With the old precast top out of the way, I could get on with rebuilding the chimney to a more suitable finish.

Reducing the chimney and installing a tile crease

The next stage was to reduce the height of the chimney by two courses of brickwork.

Once I’d taken those down, I installed a new tile crease.

For anyone unfamiliar with the term, a tile crease is a projecting course of tiles built into the chimney near the top.

It creates a drip edge, helping rainwater fall clear of the brickwork below rather than running directly down the face of the chimney.

It’s a simple detail, but a useful one for protecting the masonry from excessive water exposure.

With the tile crease installed, I could then form new flaunching on top of the chimney.

The end result was a much neater finish, without that large, deteriorating slab of concrete sitting on top.

And best of all, the job went smoothly.

Finished by half past eleven!

By 11:30am, I’d completed the work.

Now, that doesn’t happen every day!

Usually, when I think I’ve got a straightforward job ahead of me, something unexpected crops up and turns it into an all-day affair.

But not this time.

Everything went according to plan, and I found myself with a good chunk of the day still available.

So I headed home.

A workout and a much-needed trip to the tip

With the roofing work finished early, I decided to make the most of the opportunity and get a workout done in my gym.

It’s something I enjoy, but finding the time isn’t always easy when I’m travelling around the country working on roofs and chimneys.

So that was a nice bonus.

Afterwards, I turned my attention to the yard.

Over the past few weeks, we’d accumulated quite a bit of rubbish.

Old materials, waste from jobs and the usual bits and pieces that seem to pile up when you’re busy.

And the place was starting to look a bit untidy.

So I loaded everything up and headed off to the tip.

Not the most glamorous job in the world, but there’s something rather satisfying about getting rid of a load of rubbish and having a good clear-out.

Boughton – Stocking up for next week’s chimney jobs

With the yard looking a bit tidier, it was time to get organised for next week.

I headed over to Key Building Supplies in Buxton, where I needed to replenish my stock of materials.

I picked up a good quantity of sand and cement, along with eight terracotta chimney cowls for a job I’ve got booked in next week.

It’s always worth having the materials ready in advance.

There’s nothing worse than arriving at a job only to discover you’re short of something important.

Especially when you’re working at height and have already gone to the trouble of setting up the cherry picker!

With the supplies collected, I headed back home.

But my working day still wasn’t finished.

An evening with Ewan Roberts on On The Boom

Thursday evening was podcast night!

I had another episode of On The Boom – The Access Industry Podcast to record, which was also going out as a YouTube Live.

This week’s guest was Ewan Roberts from Elevate Engineer.

Ewan is just 24 years old, but he’s already working as an engineer within the powered access industry.

And he’s got a rather important mission.

He wants to encourage more young people to consider careers in the access equipment industry, particularly in engineering and machine maintenance.

It’s something I think deserves a lot more attention.

Where are the next generation of access engineers coming from?

The powered access industry relies on skilled engineers to inspect, maintain and repair the machines that people like me use every day.

Whether it’s a spider lift, truck-mounted cherry picker or one of the enormous Bronto machines, somebody needs to understand how to keep that equipment operating safely.

And like many skilled trades, the industry faces the challenge of attracting and training the next generation.

That’s where people like Ewan come in.

He’s enthusiastic about his work, keen to promote the opportunities available and determined to help address the shortage of engineers.

It was fascinating talking to somebody so young who already has such a clear idea of what he wants to achieve.

We had a really good conversation about his experiences, the engineering side of the access industry and the importance of encouraging younger people to get involved.

And that’s exactly the sort of conversation I wanted to have when I started On The Boom.

It’s not just about talking to people who operate cherry pickers.

It’s about exploring the wider industry, meeting interesting characters and learning about the people who keep everything running behind the scenes.

A thoroughly enjoyable way to finish the day.


Friday 13 November – Teamwork Makes the Dream Work in Newcastle-under-Lyme!

Friday the 13th!

Now, I’m not particularly superstitious, but when you’ve got a large chimney repair booked, a long drive ahead of you and a cold November morning to contend with, you do hope that everything goes according to plan.

Thankfully, today turned out to be an absolutely cracking day.

And a big part of that was having Tomek working alongside me.

An early start and a long drive

I was out of the house by 7am, heading over to DJI HQ to meet Tomek.

We had a long drive ahead of us, travelling across to Newcastle-under-Lyme, near Stoke-on-Trent, where we’d been booked to carry out a substantial amount of chimney and roof maintenance.

The job involved repointing a chimney stack, removing and replacing the existing flaunching, repointing sections of ridge tiles and installing three new chimney cowls.

Quite a bit to get through in one day!

And with the November temperatures dropping, it wasn’t exactly the warmest morning to be working up on a roof.

I was particularly grateful to have Tomek with me because I knew this would be a difficult job to complete on my own within the time available.

As it turned out, having the two of us working together made an enormous difference.

Getting the chimney ready for repointing

Once we’d arrived and got the cherry picker set up, we got straight to work.

My first task was to grind out the deteriorated mortar joints in the chimney brickwork.

It’s an important part of any proper repointing job.

You can’t simply smear fresh mortar over old, failing joints and expect it to last.

The deteriorated mortar needs removing to a suitable depth so that the new pointing can form a proper bond with the brickwork.

While I was up in the basket grinding out the joints, Tomek was down on the ground preparing the mortar mix.

And that’s where having a second pair of hands really starts to pay off.

Instead of constantly coming down from the chimney to mix materials, we could keep the work moving.

Dividing the jobs between us

Once the brickwork was prepared, Tomek got started with the chimney repointing.

Meanwhile, I moved on to repointing the ridge tiles.

We were both working on different parts of the job at the same time, making the most of the daylight and keeping everything progressing.

And it worked brilliantly.

By the time I’d finished the ridge pointing and struck off the mortar Tomek had applied to the chimney, he’d already moved on to the next stage.

He’d removed the old flaunching from the top of the stack, cleared everything away and prepared the surface with an SBR bonding slurry.

Now that’s what I call efficiency!

Re-flaunching the chimney

With the old flaunching removed and the top of the chimney prepared, it was time to get the new flaunching on.

We headed back down to the ground, where Tomek started preparing the fresh mix.

Once it was ready, I went back up to the chimney and started applying it.

And while I was working through that first batch, Tomek was already preparing the second.

It meant I could keep working without constantly stopping to collect materials or mix another batch.

For anyone unfamiliar with chimney flaunching, it’s the mortar or concrete finish formed around the chimney pots at the top of a stack.

Its job is to help secure the pots and shed rainwater away from the flues and brickwork.

When the old flaunching becomes cracked, loose or deteriorated, removing it and replacing it properly is often the best approach.

With the new flaunching applied and the three chimney cowls installed, we were getting towards the end of what had been a very productive job.

Teamwork really does make the dream work!

I’ve said it before, but having somebody reliable working alongside you makes an enormous difference.

And today was a perfect example.

While I was grinding out brickwork, Tomek was preparing materials.

While he was repointing the chimney, I was working on the ridges.

While I was finishing off the pointing, he was removing the old flaunching and preparing the next stage.

And while I was applying the new flaunching, he was making sure the next batch of material was ready when I needed it.

There was very little wasted time.

We both knew what needed doing, got stuck in and kept the job moving.

It’s particularly satisfying when a job flows like that.

And considering how much work we’d had to get through, I genuinely don’t think I’d have managed to complete it all in the same time without Tomek’s help.

Home by five – Mission accomplished!

Despite the long drive, the cold weather and the amount of work involved, we managed to get everything finished and were back home by 5pm.

Fantastic!

A chimney repointed and re-flaunched, ridge tiles repointed and three chimney cowls installed.

All in a day’s work.

And for once, Friday the 13th didn’t bring us any bad luck!

Just a good, productive day with a brilliant bit of teamwork.

Mission accomplished.


Saturday 14 November – A 6am Start to Beat the Traffic and a Chimney Liner in Lincolnshire

Saturday was the final day of another busy week, and there was certainly no opportunity for a lie-in.

I’d arranged to carry out some high-level vegetation clearance on a building in Nottingham, but there was one rather important consideration.

I needed to get there before everybody parked their cars!

Roden Street, Nottingham – Beating the traffic

Earlier in the week, I’d attempted to carry out some gutter maintenance on Roden Street in Nottingham.

Unfortunately, when I arrived, there were cars parked along the road, making it impossible to position the cherry picker where I needed it.

It’s one of the biggest challenges with operating access equipment in built-up areas.

Sometimes the work itself is relatively straightforward, but getting the machine into position can be the hardest part of the job.

So this time, I decided to take a different approach.

Get there before everybody else gets out of bed!

I made sure I was on site for 6am.

And what a difference that made.

The roads were absolutely empty!

No cars obstructing the access, no awkward manoeuvring around parked vehicles and no problems getting the cherry picker into position.

Perfect.

Two hours of vegetation and gutter clearance

With the machine set up, I started working my way around the building.

It was quite a large property, and there was vegetation growing up the sides that needed removing.

I also checked the gutters as I went, clearing out anything that was obstructing them and generally making sure everything was in reasonable condition.

It’s amazing how much trouble vegetation can cause if it’s left to grow unchecked.

It can find its way into mortar joints, grow behind gutters and downpipes, and create all sorts of maintenance problems.

So it’s always worth getting on top of it before things become more serious.

By around 8am, I’d worked my way around the building and completed what I needed to do.

And the best part?

I’d managed to get the job done before the roads became busy.

Sometimes getting up ridiculously early really does pay off.

The weekly Tesco shop

With the Nottingham job finished, I headed home.

And next on the agenda was something that regular readers of this blog will know I rather enjoy.

The weekly Tesco shop!

This week it was just me, Hannah and Wren.

Robyn was having a sleepover at her friend Poppy’s house, so she wasn’t joining us.

Which, to be fair, probably suited her perfectly.

Robyn isn’t particularly keen on Tesco.

I, on the other hand, quite enjoy it!

There’s something nice about wandering around the supermarket with the family, getting everything we need for the week and generally having a bit of time together.

So the three of us got the shopping done, headed home and put everything away.

But that wasn’t the end of my Saturday.

I still had another job to get to.

Fulbeck – Helping Richard Cox install a chimney liner

Once the shopping was sorted, I headed over to Fulbeck, where I’d arranged to help Richard Cox install a chimney liner.

This was another example of the sort of work I regularly get involved with alongside stove installers and other tradespeople.

Installing a chimney liner often requires somebody to access the top of the chimney safely, particularly when the stack is tall or difficult to reach.

That’s where my cherry picker comes in.

I was there to assist Richard with getting the liner down the chimney.

Thankfully, everything went according to plan.

The liner went down successfully, the job was completed and there were no unexpected complications.

Which, after some of the chimney liner adventures I’ve had recently, was rather nice!

And that’s another week done!

Once we’d finished, I headed home.

And that was it.

No more jobs to squeeze in, no more materials to collect and no more unexpected trips across the country.

Just the end of another busy week.

I’d started Saturday at six o’clock in Nottingham, managed to get the weekly shopping done with Hannah and Wren, and finished with a chimney liner installation alongside Richard.

A productive day, and a nice way to round off the week.

Although I must admit, after all the early mornings, travelling and long working days recently, I’m definitely ready for a bit of a rest.

Whether I actually get one is another matter entirely!


Looking Back on the Week

Well, that was another busy seven days.

We started with Christmas lights, Remembrance Sunday and a new crested gecko for Robyn.

Then it was straight back into chimney repairs, roof maintenance and travelling around the country.

There was a tricky shared chimney rebuild in Sheffield, three large verge repairs in Belton, a chimney completely missing its flaunching in Burton Joyce and a heavy precast concrete chimney top to remove in Ollerton.

We also had the frustration of arriving at a job in Nottingham and discovering that parked cars had made access impossible.

But at least that gave me the opportunity to make some serious progress on the Christmas lights!

Thursday was particularly satisfying, with an early finish, a workout, a tidy-up of the yard and a thoroughly enjoyable podcast conversation with Ewan Roberts.

And Friday was a brilliant reminder of just how much easier a large job can be when you’ve got somebody reliable working alongside you.

Tomek and I managed to get through a substantial amount of chimney work in Newcastle-under-Lyme, and we were still home by five.

Then Saturday rounded everything off with a six o’clock start in Nottingham, the weekly Tesco shop and a chimney liner installation with Richard Cox.

It’s been another week of early mornings, travelling, working at height and trying to squeeze family life in between.

But it’s also been a good one.

I genuinely enjoy the variety of what I do.

One day I’m repairing a chimney, the next I’m filming cherry pickers, and the next I’m talking to a young engineer who’s determined to encourage more people into the powered access industry.

And somewhere along the way, I’m putting up Christmas lights and helping the Cubs make animated films.

There’s certainly never a dull moment.

Now, if I could just find a way of making the days a little bit longer…

Places I’ve Been This Week

It’s been another busy week travelling around Nottinghamshire, Derbyshire, Leicestershire, South Yorkshire and Staffordshire, carrying out roof repairs, chimney maintenance and specialist high-level access work.

Sunday 8 November – Family, filming and Christmas lights

  • Home – Installing Christmas lights using the HighDrive HX200
  • Local Remembrance Sunday parade
  • Trent College, Long Eaton – Bird spike inspection and promotional filming
  • B&Q, Sutton-in-Ashfield – Returning the HiDrive machine

Monday 9 November – Chimney repairs

  • Sheffield, South Yorkshire – Shared chimney rebuild, repointing, re-flaunching and liner installation
  • Basford, Nottingham – Collecting Flexim roof putty from JPLAS

Tuesday 10 November – Roofing and Cubs

  • Belton, Leicestershire – Roof verge repointing, bird-proofing and ivy removal
  • Cubs – Stop-motion animation evening

Wednesday 11 November – Chimneys and Christmas lights

  • Burton Joyce, Nottinghamshire – Chimney re-flaunching
  • Roden Street, Nottingham – Attempted gutter clearance
  • Home – Christmas light installation

Thursday 12 November – Chimney repairs, supplies and podcasting

  • Ollerton, Nottinghamshire – Chimney reduction, tile crease and re-flaunching
  • Local tip – Yard clearance
  • Boughton – Key Building Supplies
  • Home – On The Boom podcast with Ewan Roberts

Friday 13 November – A big chimney job

  • Newcastle-under-Lyme, Staffordshire – Chimney repointing, re-flaunching, ridge pointing and three chimney cowls

Saturday 14 November – Gutter maintenance and chimney liner installation

  • Roden Street, Nottingham – Vegetation and gutter clearance
  • Tesco – Weekly family shop
  • Fulbeck – Chimney liner installation assistance

Need Help with Your Roof, Chimney or Gutters?

At DJI High Access Services, I specialise in carrying out roofing and high-level maintenance work using spider lifts and cherry pickers.

This allows me to reach awkward roofs, chimneys and gutters without the need for extensive scaffolding in many situations.

Some of the services I offer include:

I’m based in North Nottinghamshire and regularly work throughout Nottinghamshire, Derbyshire, South Yorkshire and surrounding areas.

If you’ve noticed a slipped roof tile, deteriorating chimney mortar, blocked gutters or signs of water getting into your property, visit www.dji-uk.co.uk to find out more or send me an enquiry.

🎙️ On The Boom – The Access Industry Podcast

If you’ve been following my adventures for a while, you’ll know that I’m fascinated by all things cherry pickers, spider lifts, truck mounts and the wider powered access industry.

Well, I’ve recently launched my very own podcast!

On The Boom – The Access Industry Podcast is all about the people behind the machines.

Every other Thursday, I sit down with someone from the industry for a relaxed, down-to-earth conversation about their experiences, businesses, machinery and the challenges they’ve faced along the way.

From cherry picker operators and business owners to engineers and industry professionals, I’m interested in hearing their stories, how they got started and what they’ve learned.

This week, I had the pleasure of chatting with Ewan Roberts from Elevate Engineer, a 24-year-old access equipment engineer who’s passionate about encouraging more young people into the industry.

It’s exactly the sort of conversation I wanted to have when I started the podcast.

We’ve also had some fantastic conversations with High Reach Rob from Reach Works and Wayne Meehan from LCD Support Services, exploring how they’ve built their businesses and found their way into the access industry.

And the best thing is, you don’t need to work in the trade to enjoy it!

If you like machinery, business stories, interesting people or simply hearing how others make a living, there’s something for you.

🎧 You can listen to On The Boom and find the latest published episodes here:

Listen to On The Boom – The Access Industry Podcast

New episodes are planned for every other Thursday.

If you enjoy listening, please consider following the podcast and sharing it with somebody who might find it interesting.

It really helps me grow the show and bring more people from the industry together.

Follow Me Online

If you enjoy seeing what goes on behind the scenes of a roofing and cherry picker business, you can follow my adventures on social media.

I share everything from day-in-the-life roofing videos and machinery reviews to unusual access jobs, family adventures and my attempts to get the occasional bit of work done without something breaking!

You can also catch my podcast, On The Boom – The Access Industry Podcast, where I chat with people from across the powered access industry about their businesses, machinery and experiences.

And if you’re interested in some of the tools, equipment and other products I use, you can browse my Amazon Shop.

Thanks to Granite Workwear

A big thank you to Granite Workwear, who continue to support me and my content.

When you’re working outdoors in all sorts of weather, having decent workwear makes a real difference.

And with the cold mornings, early starts and unpredictable conditions I’ve dealt with this week, that’s certainly something I appreciate!

If you’re looking for workwear, safety clothing or PPE, you can visit Granite Workwear through my affiliate link:

Shop Granite Workwear

Affiliate disclosure: I may earn a commission from purchases made through this link, at no additional cost to you.

About the Author

This blog was compiled and published by Danny Iwanejko, better known online as Dan the Cherry Picker Man.

I’m the owner of DJI High Access Services, a North Nottinghamshire-based business specialising in roofing, chimney maintenance, gutter repairs and difficult-access work using spider lifts and cherry pickers.

Roof Tops and Pit Stops is my weekly look at life on the road, the jobs I undertake, the machinery I use and the family adventures that happen in between.

Thanks for reading, and I’ll see you next week!

Danny – Dan the Cherry Picker Man

Leave a Reply

Your email address will not be published. Required fields are marked *