Inside Safehold: Meeting the People Behind the Safety Harness I Trust My Life To

I’ve been working with cherry pickers and access equipment for around 15 years now, and there are certain bits of equipment I use so regularly that I almost take them for granted.

My safety harness is one of them.

Every morning, before I head up in a cherry picker to repair somebody’s roof, chimney or guttering, I put my harness on. It’s something I’ve done thousands of times over the years.

But here’s a question I hadn’t really considered until recently.

Who actually makes the equipment we’re trusting our lives to?

For the past few months, I’ve been using a harness supplied by Safehold, a specialist height safety and lifting equipment company based in Sittingbourne, Kent.

They also sent me some ratchet straps and a kit bag, and I’ve been very impressed with the equipment.

But rather than simply telling you how much I liked the harness, I wanted to meet the people who designed it, find out how they tested it and see what goes into making equipment that people depend on when working at height.

So I took my mate Rob, who’s getting into the access industry himself, and we headed down to Kent.

What followed was a fascinating day learning about safety equipment, engineering, family businesses and some of the things that can go wrong during product development.

Watch my full behind-the-scenes visit to Safehold on YouTube

Meeting Ollie and the Safehold Team

Our first stop was Safehold’s headquarters, where we met Ollie, the man running the business and responsible for designing much of its equipment.

Ollie has been involved in developing safety harnesses for around 25 years, and it didn’t take long to realise how passionate he is about the industry.

His design room was full of prototypes, equipment and products at various stages of development.

Some were almost ready to launch, while others were still being refined.

What interested me was that the company wasn’t simply buying products and putting its own label on them.

There was a tremendous amount of engineering, testing and development going on behind the scenes.

And, as I was about to discover, even somebody with 25 years of experience doesn’t always get things right first time.

Twenty-Five Years of Experience and the Harness Still Failed

One of the first things Ollie showed us was a new universal-fit safety harness.

It featured a different construction from traditional harnesses, with a V-shaped design and a front opening.

A major consideration was making it more comfortable for women working in industries such as construction and powered access.

Ollie explained that the harness had undergone approximately six months of development involving physiotherapists and female military personnel.

They had tested the design for comfort, suspension and how it behaved when loaded.

I asked Ollie how much money he’d invested in developing something like that.

His answer surprised me.

Approximately £25,000.

And that was for one harness design.

But the most interesting revelation was that the prototype had failed testing three times during development.

Ollie explained that even after 25 years of designing harnesses, changes to a product’s geometry can cause forces to act on components in ways that weren’t anticipated.

A piece of hardware or stitching pattern that has worked perfectly well in one design might behave differently when used in another.

That means going back to the drawing board, changing components and testing again.

It’s worth emphasising that these were failures discovered during controlled product development, not failures of harnesses being used by workers.

And that’s precisely why the testing matters.

One thing Ollie said really stuck with me: every day is a school day.

I couldn’t agree more.

I’ve been working with access machinery for years, but there’s always something new to learn.

Testing Safety Equipment Until It Breaks

Next, Ollie showed us their tensile testing machine.

This enormous piece of equipment is capable of applying a pulling force equivalent to 100 metric tonnes.

And yes, they deliberately use it to break things.

Harness components, straps, slings and other lifting equipment are subjected to testing to establish their strength and understand their limitations.

I found this particularly interesting because I regularly use lifting straps and securing equipment when transporting cherry pickers and spider lifts.

You tend to look at a strap, check its rating and assume it’s going to do the job.

But seeing the amount of testing behind these products gives you a completely different appreciation of what goes into making them.

Ollie explained that Safehold carries out sample testing at frequencies such as one in 250 or one in 500 products, depending on the product and its load rating.

Their overseas manufacturing partners carry out testing too, with Safehold checking the results and conducting further verification when products arrive in the UK.

The whole idea is to identify problems before equipment reaches the customer.

It’s a lot better to discover a weakness in a controlled testing environment than when somebody is relying on that equipment several metres above the ground.

The People Behind the Products

One of my favourite parts of the day was meeting the people who actually make everything happen.

It’s easy to visit a company, look at its products and forget about the people behind them.

But Safehold has a fascinating team.

We met Rob, who has worked with Ollie’s family business since he was just 16 years old.

Not my mate Rob, by the way. Different Rob!

Then there was Cheryl, Rob’s wife, who’s an extremely experienced seamstress.

If something needs making from fabric or webbing, she’s the person you want involved.

We also met Andy, who looks after mechanical assembly, including components for fall arrest equipment, winches and other safety devices.

Wayne works on custom slings and straps, while Lee helps keep things running in the office, dealing with orders and customer service.

Then there’s Baz, the general manager, who has years of experience in rope access, rescue and training.

And finally, Will, Ollie’s son, who’s just started his apprenticeship.

I particularly liked Will’s attitude.

He wants to learn the business from the bottom up, starting with sweeping the floors and gradually working his way through the different departments.

It’s very much the way Ollie learned the family business himself.

There’s something rather nice about seeing that experience being passed from one generation to the next.

And it helps explain why the people at Safehold seem to take so much personal pride in what they produce.

Why Traceability Matters When Buying Safety Equipment

One of the most eye-opening discussions we had was about traceability.

Ollie explained that Safehold can trace products through their unique serial numbers and manufacturing records.

Depending on the product, that can include information about the manufacturing batch, materials, webbing, thread and even the operator responsible for particular stages of production.

Why does that matter?

Because if there’s ever a problem with a product, the manufacturer needs to be able to investigate it properly.

They need to identify which products might be affected, where they went and whether any other equipment needs to be inspected or recalled.

That’s quite reassuring when you’re talking about something designed to prevent serious injury.

Would You Trust a Cheap Safety Harness Bought Online?

I asked Ollie whether he’d personally use the cheapest safety harness he could find online.

His answer was a very definite no.

But he also made an important distinction.

Just because something is manufactured overseas doesn’t automatically mean it’s poor quality.

The real questions concern testing, compliance, traceability and who takes responsibility for the product.

If you’re buying safety equipment, you should be able to establish who manufactured it, whether it has the appropriate certification and whether the supplier can provide the relevant documentation.

Ollie also explained that Safehold carries £10 million in global product liability insurance.

That doesn’t automatically make one product better than another, but it demonstrates the importance of understanding the responsibilities that come with manufacturing safety-critical equipment.

My takeaway was simple.

When buying a safety harness, don’t make your decision on price alone.

Find out who made it, what standards it meets and whether you can obtain the documentation needed to use it safely.

Can You Step Out of a Cherry Picker Onto a Roof Ladder?

Before leaving headquarters, I asked Ollie and Baz a question that comes up quite regularly in my line of work.

Could somebody transfer from a cherry picker onto a roof ladder while remaining attached to the cherry picker’s anchor point?

It’s an interesting question, particularly for people involved in specialist roof repairs and difficult access work.

The answer was considerably more complicated than a simple yes or no.

Ollie explained that a cherry picker basket is designed and tested for particular loads and operating conditions.

Using the machine as an anchor for somebody outside the basket can introduce forces that the equipment wasn’t designed to accommodate.

There is also the question of what happens if somebody falls.

Even if the equipment remained stable, rescuing somebody suspended underneath or alongside a basket could become extremely difficult.

Baz emphasised the importance of following the manufacturer’s instructions, understanding the limitations of the equipment and having an appropriate safe system of work.

That includes a suitable risk assessment and rescue plan.

The conclusion was that this isn’t something to improvise.

Just because a machine can physically reach a position doesn’t automatically mean it’s safe to use it in a particular way.

That’s an important distinction for anybody using cherry pickers for high-level access.

An Afternoon at Safehold’s Working-at-Height Training Centre

After spending the morning at headquarters, we headed over to Safehold’s training facility.

This was where Baz took over and showed Rob and me some of the practical aspects of working-at-height safety.

Safehold’s training centre in Sittingbourne offers courses covering working at height, personal fall protection equipment inspection and rescue, among other subjects.

How to Inspect a Safety Harness Before Use

I asked Baz to demonstrate the checks that should be carried out before using a harness.

He started with the labels and identification information.

Then he worked through the webbing, looking for signs of abrasion, cuts, contamination, discolouration and possible UV damage.

Next came the structural stitching.

Any damaged or missing stitches could be significant, so these need checking carefully.

The metal components were inspected for damage, corrosion, cracks and deformation.

Finally, he checked the adjustment buckles and whether the harness fitted correctly.

It’s the sort of routine that can become easy to rush when you’re putting a harness on every morning.

But spending a little time inspecting it properly is worthwhile.

Baz also discussed recorded inspections by a competent person, with six-monthly intervals as a maximum for the professional or regular-use situation he was describing.

Inspection requirements should always follow the relevant regulations, manufacturer instructions and risk assessment.

A formal inspection doesn’t replace the need for a pre-use check.

Fall Protection, Anchor Systems and Rescue Equipment

We also looked around the training tower and examined various pieces of fall protection equipment.

These included fall arrest devices, winches, tripods and a mobile man anchor system.

The mobile anchor was particularly interesting because it’s designed for situations where suitable overhead anchorage isn’t available.

Its individual weights can be carried into position and assembled as part of an appropriate system.

Of course, the correct use of any fall protection system depends on the working environment, equipment instructions, training and a suitable risk assessment.

It was fascinating seeing equipment that isn’t necessarily part of my normal daily routine but plays an important role in other areas of the working-at-height industry.

And for Rob, who’s relatively new to access machinery, it was a valuable opportunity to learn directly from people with years of practical experience.

What This Visit Taught Me About Working at Height

I’ve always believed that experience is incredibly valuable in this industry.

But one thing this visit reinforced is that experience doesn’t mean you know everything.

Ollie has spent 25 years developing safety harnesses, and he still encounters unexpected results during testing.

Baz has years of practical experience in rope access and rescue, yet the emphasis throughout the afternoon was on understanding equipment limitations and continually improving knowledge.

And that’s something I can relate to.

Whether I’m carrying out chimney repairs, working on a difficult roof or using a particularly large cherry picker, there’s always something to learn.

Sometimes it’s about the machinery.

Sometimes it’s about the materials.

And sometimes it’s about the equipment you’re relying on to keep yourself safe.

The important thing is being prepared to listen to people who know more than you do.

A Family Business With Safety at Its Heart

One of the things I enjoyed most about Safehold was the family-business atmosphere.

You could see the relationships between the people working there.

Some have known Ollie since he was young, others have worked alongside his family for decades, and now his son is starting his own journey in the business.

That gives the company a character you don’t always find in larger organisations.

Of course, being a family business doesn’t automatically guarantee product quality.

The engineering, testing, certification and manufacturing controls still have to do their job.

But seeing how personally invested the team were in their work made the visit all the more interesting.

I went down to Kent wanting to know more about the harness I wear every day.

I came away with a much greater appreciation of the people, processes and testing involved in producing safety equipment.

And I thoroughly enjoyed meeting everybody.

Watch the full Safehold factory and training centre visit here.

Final Thoughts

A massive thank you to Ollie, Baz and everybody at Safehold for welcoming Rob and me, showing us around and taking the time to explain what they do.

Safehold supplied my harness, ratchet straps and kit bag free of charge and invited us to visit. I’ve shared my experience of the equipment and what we saw during our time there.

If there’s one thing I’d encourage anybody working at height to do, it’s to take a little more interest in the equipment they’re using.

Check your harness.

Understand its limitations.

Find out who manufactured it and whether you have the correct documentation.

And never assume that because you’ve been doing something for years, there isn’t still something new to learn.

If you’re based in Nottinghamshire or the surrounding areas and need specialist access for roof repairs, gutter maintenance or other high-level property work, you can find out more about my services at DJI High Access Services.

Frequently Asked Questions

How are safety harnesses tested?

Safety harnesses undergo various tests depending on their design, intended use and applicable standards. These can include static strength, dynamic performance and component testing. Manufacturers may also carry out additional development testing to understand how products behave under different loads and conditions.

How often should a safety harness be inspected?

A safety harness should be checked before each use for signs of damage, deterioration and incorrect adjustment. More detailed recorded inspections by a competent person are also required at suitable intervals. The correct frequency depends on the manufacturer’s instructions, relevant guidance and the conditions in which the equipment is used.

Can you use a safety harness in a cherry picker?

Suitable personal fall protection equipment may be required when operating certain types of mobile elevating work platforms. The harness, lanyard, anchor point and system configuration must be appropriate for the machine and task. Always follow the manufacturer’s instructions, training and relevant site risk assessment.

Can you step from a cherry picker onto a roof?

Transferring from a MEWP onto another structure is not something that should be undertaken without specific planning and authorisation. It can introduce risks involving machine stability, fall protection and rescue. The equipment manufacturer’s instructions and a properly developed safe system of work are essential.

What should I look for when buying a safety harness?

Check that the harness is suitable for your intended use, fits correctly and complies with the relevant standards. Make sure you can identify the manufacturer and obtain the instructions, certification information and inspection requirements. Buying the cheapest available harness without checking these details is not a sensible approach to safety.

What does Safehold manufacture?

Safehold supplies a range of height safety and lifting equipment, including safety harnesses, lifting slings, ratchet straps, fall protection systems and associated equipment. The company also provides working-at-height training through its facility in Sittingbourne, Kent. You can learn more at https://safe-hold.com/.

Follow Me Online

🌐 Website: https://www.dji-uk.co.uk/

🎥 YouTube: https://www.youtube.com/@dan_cherrypicker_man

🎵 TikTok: https://www.tiktok.com/@dan_cherrypicker_man

📸 Instagram: https://www.instagram.com/dan_cherrypicker_man/

👍 Facebook: https://www.facebook.com/dancherrypickerman

✖️ X: https://x.com/Dan_Picker_Man

💼 LinkedIn: https://www.linkedin.com/in/danny-iwanejko-18574265/

📍 Google Business Listing: https://share.google/qIIEsiPzauZxfepNd

🛠️ Amazon Shop: https://www.amazon.co.uk/shop/danthecherrypickerman?ref_=cm_sw_r_cp_ud_aipsfshop_ZC955R0FD1Q8D1FCJASP

Workwear Sponsorship

My workwear is sponsored by Granite Workwear, and you can find the clothing I wear in my videos here:

https://www.graniteworkwear.com?afid=danny

Leave a Reply

Your email address will not be published. Required fields are marked *